JIB BLOCKS
The jib block set includes (1) 2x rubber boots, (2) 2x jib blocks
and (3) a shackle.
A. To attach the two jib blocks to main beam, firstly, turn rubber
boot inside out. Then, Place over bottom of jib block.
B. Attach shackle to left eye
(4)
on the front beam.
C. Tighten shackle.
D. Fold rubber boot back over the eye.
E. Repeat, to attach second jib block to the right eye on the
front beam.
MAST
Lay mast section along centre of boat with the top of the mast
pointing towards the back of the boat.
A. Attach the rigging to the mast using the large bow shackle
(1)
.
The rigging includes;
1x set of shrouds (coated in white plastic)
2x trapeze wires
1x forestay (metal ring and pulley).
B. Attach bow shackle including rigging to crane fitting
(2)
located on the front of the mast section. It is important to tighten
this shackle.
Then you need to tidy the rigging lines in readiness for erecting
the mast.
1
1
3
2
2
2
1
2
4
4
4
3
3
2
1
1
2
1
1 + 2
1 + 2
6
