Topp Music Gear KPA 300R, Руководство пользователя

Страница: 10 / 10

KPA
KPA
The display will show the following interface. Press the PRE / NEXT key, you
can select the starting song, then press the PLAY/PAUSE key, the selected song
playback will start. Press PLAY / PAUSE key again, or press STOP key, the play
back will stop. Press key again, or press STOP key, the playback
will start again from the same point. Twice press STOP, the USB player will return
to Fig 3 interface.
c)
PLAY / PAUSE
PLAY/PAUSE key
5-Folder List:
See the Fig 3, the display shows MP 3 files folders names. Use PRE / NEXT key
to scan, press , you'll enter into corresponding folder. In order to
return to Fig 5 interface, you just need to press the STOP key.
Option Two - Track Module
The file system of USB memory for USB players is FAT16 and FAT32, and these
players can only decode MP3. It has 7 rank subordinate folders at most.
(5)(6) (7)
(1) (8) (3) (4) (2)
USB PLAYER
(Push & Hold)
POWER
TAC-MP3-T
All MP3 player information are monitored via this sexy & magic display.
8- DISPLAY:
7- POWER(Push & Hold)
When the unit is off, press this key and hold for about 2 or 3 seconds to turn
on the power supply of player. Repeat the above operation, you can turn off
the power supply of the player.
NOTE: basic interface instruction
Fig 7
03. Plena pop 04.mp
02. Plena pop 06.mp
01. lena pop 02.mp3
[ . ] 00 : 20
Fig 5
PLAYLIST SET PLAYLIST SET
PLAYING LIST PLAYING LIST
classic music classic music
Plena pop 03.mp Plena pop 03.mp
Plena pop 02.mp Plena pop 02.mp
Plena pop Plena pop
[ . ]p
3
[ . ]
[ ]
Fig 6
a) In Fig 2, select "Program" to enter into the following interface:
"Play list Set": Set the playing list. "Playing List": Play list. Press
PRE / NEXT key to select, press STOP key to return the
Fig 2 interface.
b) After entering into the "Play List Set", the display will show
as Fig 3. Selecting the desired folder, the display will show the
following interface. The display will show all the MP 3 files,
the selected song will be inserted into the playing list and a
mark will appear. Press again you're going to delete the song
from the playing list, and the mark will disappear. Press the
STOP key, you will return to Fig 2 interface. The playing list
can accept up to 20 songs, and it 'll display the list according
to song insert order.
4- "Program" mode
1- USB PORT
For connecting with USB memory.
2- PRE
In pause state, press this key, it will go to previous track and keep in pause state.
In play state, press this key, it will go to the previous track and start playing.
3- NEXT
In pause state, press this key, it will go to next track and keep in pause state.
In play state, press this key, it will go to the next track and start playing.
4- RPT
Press this key, the player will change between the following four modes:
REP ALL means to repeat all tracks in the memory, mark on the screen is
REP1 means to repeat one track, the mark on the screen is
Play in order means to play the tracks according to the order, the mark on
the screen is blank.
Random play means to play the tracks at random, the mark on screen is A.
5- PLAY/PAUSE
In play state, press this key to stop playing and all the songs in USB memory will
appear on the display ; In stop state, press
STOP/ PRE/ NEXT keys again to
go to first song and the player will keep in pause state, then press PLAY / PAUSE
key to play the song.
6- STOP
In play state, press PLAY /PAUSE key to pause the player. In pause state,
press PLAY/PAUSE key to start playing.
When the player isn't connected to a USB memory equipment, the interface is
as follows: