Toposens TS3 Datasheet
Operation Manual and Technical Specifications
Regulations
This device requires no regular maintenance. In the event that the
device becomes damaged or is inoperable, repair or service must be
handled by authorized, factory-trained technicians only. This device
should not be modified or operated without its housing.
Document Version
Revision
Date
Changes
V 1.0
07/2020
Initial release
V 1.1
07/2020
Minor corrections
PRELIMINARY PROTOTYPE
⚠️
The Sensor is delivered as a development snapshot and is thus
considered a prototype. Future iterations of Toposens products are not
to be compared to this device!
1
No responsibility is assumed by Toposens for its use, nor for any
infringements of patents or other rights of third parties that may result
from its use. We reserve the right to alter our products without notice.
This also applies to products already on order provided that such
changes do not change the functionary of the product. Damage caused
by the prototype and/or software provided by Toposens GmbH are not
covered by Toposens GmbH. Handle and use at your own risk!
TS-3 Operation Manual and Technical Specifications
1
Regulations
1
Document Version
1
Disclaimer
1
Table of Contents
1
Specifications
2
Physical
2
Electrical
2
Acoustic Properties
2
Performance
2
Interface
2
Wiring Serial Connection
2
Operational Information
3
Technology
3
Theory of Operation
3
Interface
3
Data Frame
3
Commands and Acknowledgment Messages
3
Available “set”
-Commands
3/4
Acknowledgement Messages
4
Special Case: Mode Command
4
Available “get”
-Commands
4
Performance Characteristics Horizontal FOV
5
Performance Characteristics Vertical FOV
6
Known Issues
7
Primary Reflections
7
False Positives
7
Blind Spot Areas
7
Accuracy Issues
7
Refresh Rate Drops
7
Target Angle
7
Application Note
8
Arduino Connection
8
Arduino Library
8
EMC-Analysis
8
Contact
8
Disclaimer
Table of Contents
Preliminary Prototype | All right reserved | All Information without warranty
