1 Manipulator handle 2 unloading release valve 3 start pedal 4 brake pedal
5 upper grab hook handwheel 6 reducer handwheel 7 lower grab hook
Use and Maintenance
1. After adjusting the clamp to approximately the same height as the flange on the barrel, close
the oil discharge valve and rotate the upper grab handwheel to clamp the barrel. The barrel can
be lifted by swinging up and down the handle or the pedal to start the pedal.
2. Turn the drum over: Repeated operation (1) press down the grab hook to grasp the lower
flange of the drum, shake the handle up and down, raise the drum to the desired position, and
turn the drum over by hand with the handwheel of the reducer.
Cautions: Do not turn the bucket before pressing down the grab hook and making it grasp the
lower edge of the bucket, so as to avoid danger.
3. If you press the brake pedal, you can stop the brake.
4. The principle of hydraulic system is shown in Fig. 2. The pump handle is lifted upward, which
causes the pressure oil in the tank to push the one-way valve (2) into the small oil pump and the
