TopLite International Merlin-C, Инструкция по эксплуатации, обслуживанию и устранению неисправностей

Страница: 8 / 10

the “up” or “down” keys until the display reads: “ rPAn ”. Press the “Enter” key and then scroll
through the using two choices using the “Up” or “Down” keys until you have found the mode you
wish to use and press the “Enter” to choose it:
“Standard” Display reads: “ STnD ” This is the factory default setting, the unit responds normally.
“Inverted” Display reads: “ rEv ” Movement on the Pan or “X”-axis will be reversed to any control
inputs (Left is right, right is left, etc.)
Tilt Inversion Mode
To enter the “tilt invert” mode section of your Merlin-C, press the “Menu” key and scroll through
the menu using the “up” or “down” keys until the display reads: “ rTLT ”. Press the “Enter” key and
then scroll through the two choices using the “Up” or “Down” keys until you have found the mode
you wish to use and press the “Enter” to choose it:
“Standard” Display reads: “ STnD ” This is the factory default setting, the unit responds normally.
“Inverted” Display reads: “ rEv ” Movement on the Tilt or “Y”-axis will be reversed to any control
inputs (Left is right, right is left, etc.)
To Invert
Both with ONE Operation
To enter the “Invert both pan/tilt” mode section of your Merlin-C, press the “Menu” key and scroll
through the menu using the “up” or “down” keys until the display reads: “ r-PT ”. Press the “Enter”
key and then scroll through the two choices using the “Up” or “Down” keys until you have found
the mode you wish to use and press the “Enter” to choose it:
“Standard” Display reads: “ STnD ” This is the factory default setting, the unit responds normally.
“Inverted” Display reads: “ rEv ” Movement on both the Pan or “X”-axis and the tilt or “Y”-axis will
be reversed to any control inputs (Left is right, right is left, Up is down, down is up etc)
Test Mode
To enter the “pan/tilt” mode section of your Merlin-C, press the “Menu” key and scroll through the
menu using the “up” or “down” keys until the display reads: “ TEST ”. Press the “Enter” key and
then scroll through the two choices using the “Up” or “Down” keys until you have found the
parameter you wish to test and press the “Enter” to choose it. After you press “enter”, the
Merlin-C will do a complete run-through of that particular function. The choices and their function
are self-explanatory:
“All” Display reads: “ ALL ” This is the factory default test setting; the unit will do a complete self
test/reset, without resetting the DMX address.
“Pan” Display reads: “ PAn ”
“Tilt” Display reads: “ TILT ”
“Color” Display reads: “ CoLr ”
“Gobo” Display reads: “ GoBo ”
“Shutter” Display reads: “ SHTr ”
14 .
Display Inversion Mode
To enter the “Display” mode section of your Merlin-C, press the “Menu” key and scroll through the
menu using the “up” or “down” keys until the display reads: “ rPAn ”. Press the “Enter” key and then
scroll through the two choices using the “Up” or “Down” keys until you have found the mode you
wish to use and press the “Enter” to choose it:
“Standard” Display reads: “ STnD ” This is the factory default setting, the display reads normally.
“Inverted” Display reads: “ rEv ” This will invert the display for easier reading/operation when the unit
is hung upside-down
Manual Reset Mode
To enter the “Manual Reset” mode section of your Merlin-C, press the “Menu” key and scroll
through the menu using the “up” or “down” keys until the display reads: “ rSET ”. Press the “Enter” to
choose it. You have only one choice of values here:
“Reset” Display reads: “ on ” This is the factory default reset setting, the unit will automatically
Home/Reset all of its parameters ( including its DMX address) and re-strike the lamp if it is not
already operating.
This is an “end-all” function for an instrument that has failed to respond to all other tests. If you
simply wish to test or reset a particular function on the unit, use the test function mode or use the
reset in the DMX channel number 7.
15