5. Master-slave Mode
Press the “MODE”, enter into master-slave mode “SLAv”.
6. Static Color Mode
1) Press the “MODE”, enter into static color mode “clor”.
2) Press the “SETUP”, enter into the settings menu or red brightness “r255”;
3) Press the “UP” or “DOWN”, to set the red brightness value “r000 – r255”.
4) Press the “SETUP”, enter into the setting menu of green brightness “G255”;
5) Press the “UP” or “DOWN”, to set the green brightness value “G000 - G255”.
6) Press the “SETUP”, enter into the setting menu of blue brightness “b255”;
7) Press the “UP” or “DOWN”, to set the blue brightness value “b000- b255”.
NOTE
: If no operation in 20s, the LED display will darken (no display); when in this state, press down any button,
will display the current state; when in display state, can adjust the operation mode or operating state.
