http://www.topflytech.com
This document is copyrighted by Shenzhen Topflytech Communication Technology Co.,Ltd. All rights reserved.
Any unauthorized copy or transmission of the document wholly or partially shall be held liable.
5.2 SIM Card Installation and Removal
1)
Put SIM card into the card slot.
2)
Press the waterproof rubber ring on the device by using the cover of the SIM card.
3)
Locking the cover of SIM card by screw.
4)
Stick the ornament accessories on the four screws.
Note:
The waterproof rubber ring must be flat, or it cannot play a role of waterproof.
5.3 Installation
1) Engage technician recommended by your dealer to undertake concealed installation.
During the installation, ensure the device top side (the reception face) face upward.
Secure the device in place with our standard double-side
adhesive
tape.
2) Notes
Install in concealed location to prevent theft or damage.
Avoid proximity with emission source such as parking sensor, burglar alarm and other
communication devices.
There is sponge double sticky tape (special for car) as standard accessory for this product.
(It should keep the surface clean, dry and smooth. The stickiness will be better after 24
hours). Or use cable ties to secure device in place.
Device comes with GSM and GPS antennas. Please ensure reception surface faces
upward and not shielded by metallic surfaces. Suggested installation location:
-
Beneath console of front wind screen;
-
Around dashboard (nonmetallic coating);
- Beneath console of backwind screen.
Note:
Thermal screen on windscreen may affect antenna reception causing malfunction.
Please find alternative location.
5.4 Relay Wiring Method
1) White line connects to anode of dc power (+12V/+24V), the yellow line connects to the relay
control line of the device (yellow line).
2) There is oil pump in the oil pipe of the controlled vehicle. Cut off the Positive supply of the oil
pump. Connect the positive supply of oil pump to one of the green lines. The other end is
connected to another green line.
Note:
Ensure the voltage of battery and relay compatible to prevent mal-function or damage.
You should check the battery voltage of the engine in advance.
Generally, it is 12V or 24V.
6. Cautions of Device Wiring
-
8 -
TOPFLYTECH
CONFIDENTIAL
