background image

 

 

 

 

TF90-TRS 

Safety information 

 

1. 

The machine should only be used in a flawless state, as 
well as in keeping with its intended purpose, in a safety-
conscious and risk-conscious manner and in compliance 
with these operating instructions. 

2. 

In addition to the operating manual, please heed general le-
gal and other binding regulations for accident prevention 
and environmental protection. 

3. 

Sweeping and picking up of flammable, toxic or explosive 
substances, along with flammable gases or diluted acids 
and solvents, burning or smouldering objects is prohibited!  

4. 

The appliance is not suitable for picking up fluids, cables, 
cords, wires or the like. 

5. 

The machine should only be used with the dust box fitted to 
prevent injuries caused by parts being slung out. 

6. 

Transporting loads with the sweeper is not allowed.  

7. 

Faults should be eliminated immediately, particularly those 
that could impair safety.  

8. 

Do not make any changes, modifications or additions to the 
sweeper without the approval of the manufacturer. 

9. 

Replacement parts must meet manufacturer specifications. 
This is always ensured by using original replacement parts. 

10. 

Ensure that operating media, auxiliary media and replace-
ment parts are disposed of in a safe and environmentally-
friendly manner, particularly batteries!  

11. 

Suitable non-slip footwear should be worn to avoid acci-
dents. 

12. 

If you have any questions, please contact our Service de-
partment. 

13. 

Persons (including children) who are not able to use this 
machine safely due to their physical, sensory or mental ca-
pabilities or their inexperience or lack of knowledge may not 
use this machine without the supervision or instruction by a 
responsible person! Children should be supervised to en-
sure that they do not play with the appliance. 

14. 

Caution: loose clothing can be caught and drawn in on rotat-
ing parts. 

15. 

The operating instructions provided by the battery manufac-
turer relating to his product and legal specifications for the 
handling of accumulator batteries should be heeded!  

Содержание TF90VB-TRS

























Отзывы: