Topfield TF-T6211HDPVR, Руководство пользователя, Страница: 50 / 54

4
4 Troubleshooting
No power / No front display
• Make sure the main switch on the back of the Topfield unit is
switched to ON.
• Properly insert the power plug into the power socket.
• If the power outlet is controlled by a switch, make sure the wall
switch is ON.
• Remove the power plug from the wall and wait 10 seconds, then
plug back in.
• Plug another appliance into the outlet, if the other appliance
doesn’t work then have a qualified electrician repair the outlet.
• Plug the Topfield unit power code into a different outlet.
I have connected my Topfield unit to the TV but getting no picture
• The connection must be via an AV output out of the Topfield
unit to an AV input of the TV.
• Check that you are in the correct AV setting on the TV. For ex-
ample if you connected the Topfield unit to AV2 on the TV make
sure you set your TV with the TV remote to AV2 before the Top-
field unit can be used.
• Press the button on the remote and set to the correct resolu-
tion.
576i/576p/720p/1080i/1080p. You may need to press the
button multiple times to cycle through all the different formats.
All formats will be displayed on the front screen of the Topfield
unit.
When the Service Scan is finished I get zero channels
• Check that there is a signal coming from the antenna by con-
necting it directly to the TV or another device.
• You must have signal strength between 50%–90%
• Indoor antenna is not recommended as the signal is not enough
to display channels when a service is scanned.
Getting pixilated images on the my Television
• Check the plug on the Topfield unit and on the wall making sure
that it’s a tight connection.
• Check that there is a signal coming from the antenna by con-
necting it directly to the TV or another device.
• You must have signal strength between 50%–90%