Topfield SRP-2110, Руководство пользователя

Страница: 32 / 145

26 Service Search
following steps:
1. Choose your desired satellite at the
Satellite Name
op-
tion.
2. Select the tuner that is connected to the motorized an-
tenna at the
Tuner Select
option.
3. Set the
DiSEqC Command Mode
option to
User
.
4. Set the
Motor Control
option to
Goto
. Then the antenna
will turn toward your selected satellite by the position
data that the digital receiver has.
5. If the receiving quality, which is displayed at the bottom
right of the screen, is not good, tune the antenna finely
with the
Movement
option. If you set it to
2(E)
, the an-
tenna will move to the east by two degrees. At this time
you had better check the receiving quality of every trans-
ponder and choose the best one at the
Transponder
(or
Frequency
) option. It will be helpful to your fine tuning.
6. Finally set the
Motor Control
option to
Store
to save the
tuned position when the receiving quality is best.
There are more motor control options for installers, but this
guide does not describe them. If you are an installer, refer them
to the manual about the
STAB rotor.
3.1.3 Configuring USALS settings
USALS (Universal Satellite Automatic Location System), also
known as DiSEqC 1.3, calculates the positions of all available
satellites from your location. Compared to DiSEqC 1.2, it is
no longer required to manually search and store every satellite
position. Just pointing to a known satellite position is enough.
This position will act as a central point. The USALS will then
calculate positions of visible satellites.