Topfield Freeview TRF-7150, Руководство пользователя

Страница: 64 / 78

58 Accessing to The Digital Receiver via The Internet
8.2 Configuring the network settings on the digital receiver
You should configure the LAN settings to enable the web ser-
vice.
Select the Installation > LAN Set-
ting > IP Configuration menu.
You may get the digital receiver to be assigned a dynamic IP
address. Set the DHCP option to On to do that. You can view
the dynamic IP address assigned to the digital receiver by your
router at the
LAN Status menu.
Sometimes when the digital receiver is restarted, the dynamic
IP address will be changed and you will have to check it at the
LAN Status menu to access the digital receiver. To avoid this
cumbersome thing, you had better assign a static IP address
rather than dynamic one.
Set the
DHCP
option to
Off
, then the
IP Address
,
Subnet Mask
and Gateway options become enabled. You have to set these
options to match with the configuration of your router.