Topex MobiLink ISDN 2 GSM, Руководство пользователя

Страница: 29 / 41

TOPEX MobiLink ISDN2GSM User`s Manual
29
4. Installing the OAM program
The OAM program called ISDNCFG is required in order to configure
and control the MobiLink ISDN 2 GSM equipment.
Also, it allows you to send and receive SMS messages from the
computer that is connected to MobiLink via serial cable.
This Operation, Administration, and Maintenance program runs under
Windows operating system.
To install the program, connect to the MobiLink the PC you will use for
programming, by means of the special serial cable for configuration.
Figure 4-1 Configuring MobiLink via serial connection
Set the communication on the COM serial channel where the
MobiLink ISDN 2 GSM is connected.
Just insert the diskette into the 3,5 inch diskette drive unit and copy
the structure of folders and files to your hard disk drive.
Then run the ISDNCFG.EXE file from the folder on the hard disk
By means of the graphic interface of the configuration program you
can begin to adjust MobiLink settings (parameters for GSM
modules, ISDN TE and NT interfaces, routing table, CLIP table,
name of connection, etc.)
You must establish the settings according to the routing functions
that your application requires.
For details, please see the “
Operating Manual
” for the OAM
program ISDNCFG. The manual includes several examples of
configuration of parameters for usual applications.
Also, the OAM program features online help, providing you
information about each command.