Topex 44E026, Оригинальное руководство

Страница: 7 / 24

7 TOPEX.PL
Do not leave the soldering iron switched on, when 16.
it is not in use.
The tool is designed for 230 V power supply. Supply 17.
the tool only with such voltage.
Use the soldering iron accordingly to the manual 18.
only.
If the tool is not used, it must be placed in the 19.
base.
wARNING!
Do not use soldering joints for elements that may –
be subject to temperature above 130°C.
Do not join parts used for lifting weights with –
solder joints.
Do not solder live electrical installations or circuits
–
that require ESD protection.
CAUTION!
Power cord and plug must not be damaged.Do
not heat up the soldering iron with dismantled
tip.
In soldering iron with soldering tip loosely fitted, the
heating element wears out very quickly.
CAUTION!
Make all checks and repairs only when the
soldering iron is disconnected from mains
network. All checks and repairs should be carried out
by the supplier’s service department or by service site
certified by the supplier.
CAUTION!
It is recommended to conduct few soldering
tries on waste pieces of soldered material. Ability
to handle the soldering iron comes with practice.
INTENDED USE
Soldering iron can be used to join metal parts with the
use of low-melting filler, e.g. zinc-lead for soft soldering.
The soldering iron is especially useful for joining large
cross-section elements, e.g. automotive electrical
installations, low-voltage electrical installations
in buildings and other works that require higher
temperatures.
TECHNICAL PARAMETERS
Power supply voltage and frequency 230 V, 50 Hz
Rated power 60 W
Temperature of heating tip approx. 500°C
Heat up time approx. 3 min.
Protection class I class
Weight 0,32 kg
TOOL ELEMENTS (fig. 1)
Casing a.
Tip b.
Fixing screw c.
OPERATION, HANDLING AND
MAINTENANCE
When the soldering iron is connected to power network
soldering tip (1b) starts to heat up. Heating lasts for 3
minutes. This is when soldering tip heats up to the
temperature of solder melting. When the soldering
iron is used for the first time, it is recommended to
thoroughly cover soldering tip with zinc for easier
operation. Once the soldering tip is hot, touch soldered
spot with it and apply flux cored zinc solder wire to join
two elements.
Replaceable part in the soldering iron is the tip. To
replace soldering tip, remove the plug from mains
socket, wait until the tip is cooled down completely (do
not cool down in water) and unscrew tip fixing screws
(1c). Replace tip and tighten screws to fix it.
Do not dispose of electrically powered
products with household wastes, they should
be utilized in proper plants. Obtain information
on wastes utilization from your seller or local
authorities. Used up electric and electronic
equipment contains substances active in
natural environment. Unrecycled equipment constitutes a
potential risk for environment and human health.
ПАЯЛЬНИК КОНТАКТНый
44E026
Внимание! Приступая к работе с
паяльником, следует внимательно
прочитать настоящую инструкцию и
сохранить ее для дальнейшего использования.
ПРАВИЛА ТЕХНИКИ БЕЗОПАСНОСТИ
Данный прибор не предназначен для использования
людьми (включая детей), у которых есть физические,
нервные или психические отклонения или
недостаток опыта и знаний, за исключением случаев,
когда за такими лицами осуществляется надзор или
проводится их инструктирование относительно
использования данного прибора лицом, отвечающим
за их безопасность.
Необходимо осуществлять надзор за детьми с целью
недопущения их игр с прибором.
Паяльник не оснащен индикатором температуры.
Неаккуратное обращение с инструментом может
RU