Step2
(Step3)
Connect the clamps to the vehicle battery. Red clamp to
positive po), black clamp to negative polarity(-).
The Safety Indicator will be solid green which indicates
it is ready for jump starting.
NOTE: Please check the connection if the Safety Indicator is
abnormal or the buzzer rings.
Step3
Try to start the vehicle. If it fails, disconnect the clamps
from the vehicle battery and wait about 20 seconds,
then reconnect and try again. Do not attempt more than
3 consecutive jump starts within 2 minutes.
Step4
Remove the clamps from batteries, then separate the
jumper cable and jump starter after cranking the vehicle
successfully. Your jump starter will automatically power
off in several seconds.
(RED)
(Black)
Model
Peak Current
Battery capacity
Output
Input
WorkingTemperature
Storage Temperature
JUMPSURGE1200/JUMPSURGE2000
1200A(JUMPSURGE1200);
2000A(JUMPSURGE2000)
10000mAh, 3.7V/37Wh(JUMPSURGE1200);
16000mAh, 3.7V/59.2Wh(JUMPSURGE2000)
USB1 QC18W, 5V/9V/12V;
USB2 5V 2A; DC Max 16.8V 10A
Type-C 5V 3A, 9V 2A
-10°C~40°C(14°F~104°F)
-20°C~75°C(-4°F~167°F)
5
6
EN
