Topcon RL-SV2S, Инструкция по эксплуатации

Страница: 77 / 82

13. Regulations
69
Region/
Country
Directives/
Regulations
Labels/Declarations
Canada ICES
Contains IC: XXXXX-XXXXX(RL-SV2S)/XXXXX-XXXXX(RC-60)
The term “IC:” before the radio certification number only signifies that
Industry Canada technical specifications were met.
“Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.”
“The installer of this radio equipment must ensure that the antenna is located
or pointed such that it does not emit RF field in excess of Health Canada
limits for the general population; consult Safety Code 6, obtainable from
Health Canada’s website www.hc-sc.gc.ca/rpb”
“This device has been designed to operate with the antennas listed below,
and having a maximum gain of 0.61 dB. Antennas not included in this list or
having a gain greater than 0.61 dB are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms.”
“To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication.”