Topcon Pocket-3D, Справочное руководство, Страница: 236 / 316

Survey Menu
Pocket-3D Reference Guide
4-10
Start Tape Dimension
To measure lines perpendicular or at angles to each other, tap
Survey

Measure pts

Start tape dimension
(Figure 4-16).
Figure 4-16. Survey

Measure Pts.

Start Tape Dimension
On the
start tape dimension
dialog box, enter or select the following
information, and press
Ok
(Figure 4-17 on page 4-11).
• Pt. layer – select a layer name from the drop-down list.
• Polyline layer – select a polyline layer from the drop-down list.
•
From Point
– select the beginning of the tape measurement at a
known point on the
points listing
dialog box.
•
To Point
– select the end of the tape measurement at a known
point on the
points listing
dialog box.
• Inverse arrows ( ) – press to reverse the
From Point
and
To
Point
fields on the
points listing
dialog box.
• Use ENT to tape dim. – enable the ENTER key to start the
measurement on each taped dimension.
• Draw Polyline – enable to create a polyline.