Topcon Pocket-3D Скачать руководство пользователя страница 154

Страница: 154 / 316

Data Menu

Pocket-3D Reference Guide

3-44

Press Report

to display the

Volume

results dialog box. The report

screen displays the following results (Figure 3-64): Date, Name of
Design Surface, Name of Existing Surface, Common Area, Cut vol-
ume, Fill volume, and Volume difference.
To save the information:

1. Press

Save

on the

Volume report

dialog box.

2. Enter the name of the text file.
3. Select a folder and location in which to store the text file.
4. Press

Figure 3-64. Compare Surface Report

Press Display

to select the desired parameters for the surface display

(Figure 3-65 on page 3-45), then press

• Show contours – enable to display the contour lines at a set

interval on the surface.

• Show solid colors – enable to display solid colors at a set interval

on the surface.

• Interval – enter the desired contour interval.

Содержание Pocket-3D





























































































































































































































































































































Результаты поиска

Содержание Pocket-3D

Отзывы:

Topcon Pocket-3D, Справочное руководство, Страница: 154 / 316

Результаты поиска

Содержание Pocket-3D

Отзывы: