background image

How to set up the wireless communication default setting (Only 

LS-B110W)

Place the LS-B110W and RD-100W in close position, so that they will not be 
affected by other wireless communications.

1

 Turn on the power for both the LS-B110W and RD-100W.

2

 Long-push the wireless communication switch for the LS-B110W 

and RD-100W.  While setting up, the wireless communication 
LED (yellow light) will turn on.

3

 When the instrument is ready to be used, the communication will 

begin.

How to use wireless communication (Only LS-B110W)

When power for both the LS-B110W and RD-100W are turned ON, commu-
nication will automatically begin. 
During communication, the wireless communication LED will flash quickly.
During communication preparation, the wireless communication LED will 
flash slowly.

Lighting/Flashing pattern of wireless communication LED

Lights

While setting up the default

Flashes quickly

While LS-B110W is

communicating

Flashes slowly

Communication is in preparation

This instrument is able to perform wireless communication with the 

RD-100W, sold separately.

See the RD-100W instruction manual for details on the RD-100W.

• If the communication fails, the wireless communication LED 

will flash slowly.  Eliminate any influence from other wireless 
instrument and redo the communication default setting.

• While setting up the default, only the default OFF (short-push 

of the wireless communication switch) is operable.

• When the detective precision, tilt direction, tilt precision or 

ON-GRADE position settings are changed, the setting for the 
RD-100W will also change in conjunction with the LS-B110W.

• If you wish to change the RD-100W to communicate, redo the 

communication default setting.

Specifications

Detective range

:

250mm (6.8inches)

Detective angle

:

360°

Detective precision

:

Mode1: ±3mm (0.009ft)

:

Mode2: ±6mm (0.019ft)

:

Mode3: ±15mm (0.049ft)

:

Mode4: ±30mm (0.098ft)

Detectable laser wave 

length

:

633 to 785nm

Laser detecting range

(diameter)

:

800m (2625ft)

(Using the RL-100 1S/2S)

Wireless communication

range

:

20m

(May vary depending on obstacles between 

the two instruments as well as other conditions)

Internal battery

:

:

C-size dry cells 4pcs.

Battery pack BT-68Q (sold separately)

External power supply

:

DC 10V to 30V

Continuous operating 

time*

(+20°C/+68°F)

:

:

(Using alkaline manganese dry cells)

      LS-B110     :Approximately 80 hours

      LS-B110W  :Approximately 40 hours

(Using Battery pack BT-68Q)

      LS-B110     :Approximately 40 hours

      LS-B110W  :Approximately 18 hours

Operating temperature

:

-20°C to +50°C (-4°F to +122°F)

Water proof

:

IP66 (Based on the standard IEC60529)

Dimensions (W/D/H)

:

158x166x357 (mm) (6.2"x6.5"x14.0")

(With Mechanical Clamp)

Weight (Without cells)

:

2.0kg (4.4lbs)

* When the LS-B110W is performing wireless communication.

Detective angle, Detective precision and Laser detecting range may vary 

depending on rotating laser being used or atmospheric conditions.

Battery using time will vary depending on environmental conditions and 

operations done with LS-B110/LS-B110W.

75-1 Hasunuma-cho, Itabashi-ku, Tokyo 174-8580, Japan  
                                 www.topcon.co.jp

7400 National Drive, Livermore, CA 94551, U.S.A.
Phone: 925-245-8300 Fax: 925-245-8599 www.Topconpositioning.com

3380 Industrial Blvd, Suite 105, West Sacramento, CA 95691, U.S.A.
Phone: 916-374-8575 Fax: 916-374-8329

Essebaan 11, 2908 LJ Capelle a/d IJssel, The Netherlands.
Phone: 010-458-5077 Fax: 010-284-4941 www.topconeurope.com

 

Giesserallee 31, 47877 Willich, GERMANY
Phone: 02154-885-100 Fax: 02154-885-111  [email protected]
www.topcon.de

89, Rue de Paris, 92585 Clichy, Cedex, France.
Phone: 33-1-41069490  Fax: 33-1-47390251  [email protected] 

Phone: 031-7109200 Fax: 031-7109249

Topcon House Kennet Side, Bone Lane, Newbury, Berkshire RG14 5PX U.K.
Phone: 44-1635-551120 Fax: 44-1635-551170
[email protected]   [email protected]

Blk 192 Pandan Loop, #07-01 Pantech Industrial Complex, Singapore 128381
Phone: 65-6778-3456 Fax: 65-6773-6550  www.topcon.com.sg

77/162 Sinn Sathorn Tower, 37th Fl.,

Krungdhonburi Rd., Klongtonsai, Klongsarn, Bangkok 10600 Thailand.
Phone: 66-2-4401152~7  Fax: 66-2-4401158

No.D1, (Ground, Lower Ground & 1st Floor), Jalan Excella 2, Off Jalan Ampang
Putra, Taman Ampang Hilir, 55100 Kuala Lumpur, Malaysia
Phone: 60-3-42709866  Fax: 60-3-42709766

2F Yooseoung Bldg., 1595-3, Seocho-Dong, Seocho-gu, Seoul, 137-876, Korea.
Phone: 82-2-2055-0321 Fax: 82-2-2055-0319  www.topcon.co.kr

Block No.9, Kangding Street
Beijing Economic-Technological Development Area, Beijing, 100176, China
Phone: 86-10-6780-2799  Fax: 86-10-6780-2790

P. O Box293705, Office C-25(row C-2), Dubai Airport Free Zone, Dubai, UAE
Phone: 971-4-2995900 Fax: 971-4-2995901  [email protected]

Unit 69 Western Parkway Business Center

Phone: 01460-0021 Fax: 01460-0129

Lower Ballymount Road, Dublin 12, Lreland

6F

31267 90041

FCC WARNING

Changes or modifications not expressly approved by the manufac-
turer for compliance could void the user’s authority to operate the
equipment.

In order to comply with FCC radio-frequency radiation exposure
guidelines for an uncontrolled exposure, this device and its
antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set
forth for uncontrolled equipment and meets the FCC radio fre-
quency (RF) Exposure Guidelines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment has very low levels of RF energy that it is deemed to
comply without testing of specific absorption ratio (SAR).

This device complies with Part 15 of FCC Rules and RSS-Gen of
IC Rules.  Operation is subject to the following two conditions : (1)
this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of this device.

 

 

Declaration of Conformity

 

 

R&TTE Directive  1995/5/EC

WE:

  

TOPCON CORPORATION

 

 

75-1 Hasunuma-cho Itabashi-ku Tokyo Japan 

 

 

declare on our own responsibility, that the product;

Kind of Product:

 

Laser Sensor

Type designation:

 LS-B110W

is in compliance with the following norm(s) or documents;

Radio  :EN 300 328

EMC    :EN 301 489-1/17

safety  :EN 60950

Отзывы: