manualshive.com logo in svg

Topcon HiPer Plus, Руководство оператора, Страница: 175 / 184

Поделиться
Скачать
Topcon HiPer Plus Скачать руководство пользователя страница 175

Appendix E

1-866-4TOPCON

www.topconpositioning.com

E-1

W

arranty Terms

TPS laser and electronic positioning equipment are guaranteed 
against defective material and workmanship under normal use 
and application consistent with this Manual. The equipment is 
guaranteed for the period indicated, on the warranty card 
accompanying the product, starting from the date that the product 

is sold to the original purchaser by TPS’ Authorized Dealers.

1

During the warranty period, TPS will, at its option, repair or 
replace this product at no additional charge. Repair parts and 
replacement products will be furnished on an exchange basis and 
will be either reconditioned or new. This limited warranty does 
not include service to repair damage to the product resulting from 
an accident, disaster, misuses, abuse or modification of the 
product.

Warranty service may be obtained from an authorized TPS 
warranty service dealer. If this product is delivered by mail, 
purchaser agrees to insure the product or assume the risk of loss 
or damage in transit, to prepay shipping charges to the warranty 
service location and to use the original shipping container or 
equivalent. A letter should accompany the package furnishing a 
description of the problem and/or defect.

The purchaser’s sole remedy shall be replacement as provided 
above. In no event shall TPS be liable for any damages or other 
claim including any claim for lost profits, lost savings or other 
incidental or consequential damages arising out of the use of, or 
inability to use, the product.

1. The warranty against defects in Topcon battery, charger, or cable 

is 90 days.

Содержание HiPer Plus

























































































































































































Отзывы:

Нет отзывов