Topcon HiPER GD, Руководство оператора

Страница: 68 / 180

Configuration
Topcon HiPer GD and HiPer GGD Operator’s Manual
2-26
Also, if Always is enabled, your receiver will automatically
start logging data (to a newly created or an existing file) in the
following three cases:
• After pressing the Power key to turn on the receiver.
• After resetting the receiver (with PC-CDU or the Reset
key).
• After taking the receiver out of Sleep Mode.
Table 2-1. Data Recording Parameter Behavior
Before Power
Failure
Enabled Radio Button Results
Off On Always
1
Receiver data
logged to file
specified. Data logging will
not resume when
power is restored. Receiver will
resume data
logging to the
same file when
power is restored. Receiver will
resume data
logging to the
same file when
power is restored.
2
Receiver data
logged to
default file. Data logging will
not resume when
power is restored. A new log file
will open when
power is restored
and data will log
to this file. A new log file
will open when
power is restored
and data will log
to this file.
3
File specified;
receiver data
logging not
started. No file will open
with this name.
Data logging will
not start when
power is restored. No file will open
with this name.
Data logging will
not start when
power is restored. A log file with
this name will
open and data
logging will start
after power is
restored.
4
No file
specified;
receiver data
logging off. Data logging will
not start when
power is restored. Data logging will
not start when
power is restored. A log file with a
default name will
open and data
logging will start
after power is
restored.