Topcon GTS-710 Series Скачать руководство пользователя страница 61

Страница: 61 / 92

10 SETTING ATMOSPHERIC CORRECTION

10-53

8.3

經緯儀功能之檢驗與校正

Pointers on the Adjustment

Adjust the eyepiece of the telescope properly prior to any checking operation which

involves sighting through the telescope.

Remember to focus properly, with parallax completely eliminated.

Carry out the adjustments in the order of item numbers, as the adjustments are

dependent one upon another. Adjustments carried out in the wrong sequence may
even nullify previous adjustment.

Always conclude adjustments by tightening the adjustment screws securely (but do

not tighten them more than necessary, as you may strip the threads, twist off the
screw or place undue stress on the parts).

Furthermore, always tighten by revolving in the direction of tightening tension.

The attachment screws must also be tightened sufficiently, upon completion of

adjustments.

Always repeat checking operations after adjustments are made, in order to confirm

results.

Notes on the Tribrach

Note that the angle measuring precision may be effected directly if the tribrach has not
been installed firmly.

If any leveling screw becomes loose and slack or if collimation is unstable due to the

looseness of leveling screws, adjust by tightening the adjusting screws (in 2 places)
installed over each leveling screw with a screwdriver

If there is any slack between the leveling screws and the base, loosen the set screw of

the holding ring and tighten the holding ring with adjusting pin, until it is properly
adjusted. Re-tighten the set screw on completing the adjustment.

校正螺絲

鎖定螺絲

校正螺絲

踵定螺旋

固定環

Содержание GTS-710 Series





























































































Результаты поиска

Содержание GTS-710 Series

Отзывы:

Бренды по названию

Популярные бренды

Topcon GTS-710 Series, Руководство пользователя

Результаты поиска

Содержание GTS-710 Series

Отзывы:

Бренды по названию

Популярные бренды