Topcon FH2400, Справочник по командам

Страница: 15 / 20

11
1 - 8 6 6 - 4 T O P C O N w w w . t o p c o n g p s . c o m
ATO/ato
This command is used to revert the modem to the operating mode.
This command is not case sensitive. When the modem is in the
operating mode, the only command it recognizes is +++.
modem/fh/base
With this command the user assigns the operating channel number
to the modem. It allows the use of up to five simultaneously
transmitted radio modems on your jobsite without interference
between them.
Structure
ATO
Example
ato
or
ATO
Reply
OK
- positive acknowledgment,
Error in Command
- negative acknowledgment
Structure
set,modem/fh/base,N
, where N is the channel number,
from 1 to 5.
print,modem/fh/base
Example
set,modem/fh/base,1
- specify the operation channel
number
print,modem/fh/base
- queries the channel number that
is currently being used by your radio modem
Reply to
set %%OK -> base=N
- positive acknowledgment, where N is
the channel number
Error in Command
- negative acknowledgment. This reply
indicates that the command has been typed incorrectly.
Error in Argument
- negative acknowledgment. This
shows that the argument is not correct.
Reply to print base=N - positive acknowledgment, where N is the channel
number
Error in Command
- negative acknowledgment