Microprocessor
:
SH7750S
Processor speed
:
162MHz
MIPS
:
300MIPS
Operating system
:
Microsoft Windows CE Ver. 3.0
Memory
:
32MB / 64MB RAM with flash ROM 2MB
32MB / 64MB / 128MB flash disk (Internal)
RAM retention
:
Li-rechargeable battery(65mAh)-backed for data when main battery not
present
Display
:
320x240 QVGA (monochrome)
STN Reflective type
Temperature compensation
Illumination
:
Front light (CCFL)
Key board
:
56 key keyboard with separate alpha and numeric
Pen touch screen
:
Resistive touch screen/passive Pen digitization
Interface
:
RS-232C serial (6 pin)
RS-232C serial (D-sub 9)
USB(1.1)
Compact flash : Type I / Type ll (Based on Compact Flash)
External power
:
8.4V to 20V Available run charge (11V to 20V)
Audio
:
Sealed Speaker (mono) Sealed Microphone
Durability
:
IP66 (Based on the standard IEC 60529)
*1)
*1) With the connector and slot covers
Operation
Temperature
:
-20°C to +50°C (-4°F to +122°F)
Storage
Temperature
:
-30°C to +60°C (-22°F to +140°F)
Protection against
shock
:
Designed to protect falling on the hard surface from 1.0m above the ground.
EMC
:
CE, FCC
Integral heater
:
Auto/Off
Battery BT-59Q
:
Li-ion rechargeable Battery 7.4V 1800mAh
(This battery does not contain mercury.)
Rating
:
8 hours
Charging time
:
Approx. 3.0 hours with BC-29
Approx. 6.0 hours with AD-9B/7C
Dimensions
:
255x130x61.5(mm)
Weight
:
0.8kg(with battery)
Battery Installation
1
Remove the handstrap from the FC-1000.
2
Using a coin, loosen the screw on the battery cover.
3
Remove the battery cover.
4
Install the battery pack.
5
Using a coin, install the battery cover. Tighten the screw
firmly.
STORAGE PRECAUTIONS
SPECIFICATIONS
Always clean the instrument after use.
Use a clean cloth moistened with neutral detergent or water.
Never use an abrasive cleaner, ether, thinner benzene, or other solvents.
Always make sure the instrument is completely dry before storing. Dry any moisture with a soft,
clean cloth.
FC-1000 64837 90030 0303 (4D)
TRANSMITTION DATA TO THE PC
1
Turn on the PC and the FC-1000.
2
Connect the FC-1000 to your PC with the interface cable A-21 as shown below.
The FC-1000 will prompt “Connecting to Host”.
3
The PC will prompt for setting up a partnership or setting up as a guest.
When working as a guest, you can browse the files on your FC-1000 and copy or move
information. Choose [ESC] to set up as a guest.
Once a connection has been established, the icon will appear on your PC.
4
Click on [Explore] to move or copy files between the PC and the FC-1000.
Serial
COM1
PC
Interface cable A-21
FC-1000
COM port
Reference software for Connectivity
See the WEB page as follows.
www.microsoft.com/mobile/pocketpc/downloads/activesync35.asp
The FC-1000 has an external CF slot, so the files in the FC-1000 can move to your PC through the CF
card.
CF slot
(TYPE I/
CF card and
PCMCIA adapter
PC with PCMCIA slot
FC-1000
PREPARATION FOR USE
There are two ways to charge the battery as follows.
Battery Charging (Using BC-29)
1
Install the battery on the BC-29.
2
Plug the power cord in an outlet.(AC-120V or 230V) Charging is
completed after approximately 3 hours.
The Charge LED of BC-29 will indicate charging status;
Red ON
: Charging.
Green ON
: Charging completed.
Red Flashing
: Charging error.
On Solid
: Pre charging.
Battery Charging (Using AD-9B/7C)
1
After installing the battery, plug the connector of AD-9B/7C in the FC-
1000.
2
Plug the AD-9B/7C in an outlet. Then the run charge LED will light.
Charging is completed after approximately 6 hours.
The display can be turned on or off by the power key.
The Run Charge LED of FC-1000 will indicate charging status;
Red ON
: Charging.
Green ON
: Charging completed.
Red Flashing
: Charging error.
Be sure to turn the FC-1000 power OFF when removing the battery, since
the data will be lost.
Battery
Adjusting Touch Screen
1
Turn on the instrument after hard-reset or tap [Start] [Setting] [Control Panel] [Stylus].
2
Using a stylus pen, touch the center of the cross hairs. (5 points)
3
After touching all corsairs, press [ENT] key.
(Use an accessory stylus pen to touch a screen. Do not use neither a ball-point pen nor pencil.
Stylus pen
Corsairs
Touch Screen
Note
1)Recharging should take place in a room with an ambient temperature range of +10°C to +40°C (+50°F to +104°F).
2)The battery source will discharge when stored and should be checked before using with instrument .
3)Be sure to charge a stored battery source every 15 days and store in a place at 30°C and below when it will not
used for a long period. If you allow the battery to be completely discharged, it will have an effect on the overall
performance for proper charging in the future.
4)The charger may develop heat while charging, there is no problem of it.
5)If charging is done at high temperature, charging time of the battery may take longer.
Interface Cable
CF Card
BC-29
BT-59Q
AD-9B/7C
RUN Charge LED
Connector
Charge LED
TOPCON CORPORATION
75-1 Hasunuma-cho, Itabashi-ku, Tokyo 174-8580, Japan
Phone: 3-3558-2520 Fax: 3-3960-4214 www.topcon.co.jp
TOPCON POSITIONING SYSTEMS, INC.
5758 West Las Positas Blvd., Pleasanton, CA 94588, U.S.A.
Phone: 925-460-1300 Fax: 925-460-1315 www.topcon.com
TOPCON CALIFORNIA
3380 Industrial Blvd, Suite 105, West Sacramento, CA 95691, U.S.A.
Phone: 916-374-8575 Fax: 916-374-8329
TOPCON MIDWEST
891 Busse Road, Elk Grove Village, IL 60007, U.S.A.
Phone: 847-734-1700 Fax: 847-734-1712
TOPCON EUROPE B.V.
Essebaan 11, 2908 LJ Capelle a/d IJssel, The Netherlands.
Phone: 010-4585077 Fax: 010-4585045 www.topconeurope.com
TOPCON BELGIUM
Preenakker 8, 1785 Merchtem, Belgium
Phone: 052-37.45.48 Fax: 052-37.45.79
TOPCON DEUTSCHLAND G.m.b.H.
Weidkamp 180, 45356 Essen, GERMANY
Phone: 0201-8619-100 Fax: 0201-8619-111 [email protected]
www.topcon.de
TOPCON S.A.R.L.
89, Rue de Paris, 92585 Clichy, Cedex, France.
Phone: 33-1-41069490 Fax: 33-1-47390251 [email protected]
TOPCON ESPAÑA S.A.
HEAD OFFICE
Frederic Mompou 5, ED. Euro 3, 08960, Sant Just Desvern Barcelona, Spain.
Phone: 93-473-4057 Fax: 93-473-3932 www.topconesp.com
MADRID OFFICE
Avenida Burgos, 16E, 1∞28036, Madrid, Spain.
Phone: 91-302-4129 Fax: 91-383-3890
TOPCON SCANDINAVIA A. B.
Neongatan 2 S-43151 Mölndal, SWEDEN
Phone: 031-7109200 Fax: 031-7109249
TOPCON (GREATBRITAIN) LTD.
HEAD OFFICE
Topcon House Kennet Side, Bone Lane, Newbury, Berkshire RG14 5PX U.K.
Phone: 44-1635-551120 Fax: 44-1635-551170
[email protected] [email protected]
TOPCON SOUTH ASIA PTE. LTD.
Blk 192 Pandan Loop, Pantech Industrial Complex, #07-01, Singapore 128381
Phone: 62780222 Fax: 62733540 www.topcon.com.sg
TOPCON AUSTRALIA PTY. LTD.
408 Victoria Road, Gladesville, NSW 2111, Australia
Phone: 02-9817-4666 Fax: 02-9817-4654 www.topcon.com.au
TOPCON INSTRUMENTS (THAILAND) CO., LTD.
77/162 Sinn Sathorn Tower, 37th Fl.,
Krungdhonburi Rd., Klongtonsai, Klongsarn, Bangkok 10600 Thailand.
Phone: 662-440-1152~7 Fax: 662-440-1158
TOPCON INSTRUMENTS (MALAYSIA) SDN. BHD.
Lot 226 Jalan Negara 2, Pusat Bandar Taman Melawati,
Taman Melawati, 53100, Kuala Lumpur, Malaysia.
Phone: 03-41079801 Fax: 03-41079796
TOPCON KOREA CORPORATION
2F Yooseoung Bldg., 1595-3, Seocho-Dong, Seocho-gu, Seoul, 137-876, Korea.
Phone: 82-2-2055-0321 Fax: 82-2-2055-0319 www.topcon.co.kr
TOPCON OPTICAL (H.K.) LIMITED
2/F., Meeco Industrial Bldg., No. 53-55 Au Pui Wan Street, Fo Tan Road,
Shatin, N.T., Hong Kong
Phone: 2690-1328 Fax: 2690-2221 www.topcon.com.hk
TOPCON CORPORATION BEIJING OFFICE
Room No. 962 Poly Plaza Building, 14 Dongzhimen Nandajie,
Dongcheng District, Beijing, 100027, China
Phone: 10-6501-4191~2 Fax: 10-6501-4190
TOPCON CORPORATION BEIRUT OFFICE
P. O. BOX 70-1002 Antelias, BEIRUT-LEBANON.
Phone: 961-4-523525/961-4-523526 Fax: 961-4-521119
TOPCON CORPORATION DUBAI OFFICE
P.O.Box 28595, 102, Al Naily Bldg., 245 Abu Hail Road, Deira,Dubai,UAE
Phone: 971-4-2696511 Fax: 971-4-2695272
Back-Up Battery
•The back-up battery built in FC-1000 needs to be charged approximately 24hrs. before using it for the first time after
purchase. Connect the AD-9B/7C or install the fully charged BT-59Q battery to FC-1000 in order to charge the
back-up battery.
•Leaving FC-1000 without the BT-59Q battery or AD-9B/7C for more than an hour will cause the memorized data to
be lost, due to low voltage of the back-up battery. Connect the BT-59Q battery or AD-9B/7C as soon as possible.
Note:
The instrument may develop heat while charging, there is no problem of it.
EMC NOTICE
FCC conditions
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
