34
4. LEVELING
In Leveling Mode, “Out Module” should be set as “Flash” or “SD”. In this section, we
take “Flash” for example.
If user wants to save leveling measured data directly to SD card, the “Out Module”
should be set as “SD”.
4.1 Start Leveling
In “Start Leveling” function, user should input job name, pointname and height of
benchmark, and then start to do the measuring.
Leveling 1: B1
→
F1
→
F2
→
B2
Leveling 2: B1
→
B2
→
F1
→
F2
Leveling 3: B
→
F/ B
→
I
→
F
Leveling 4:Outward/Return
：
B1
→
F1
→
F 2
→
B 2/ F 1
→
B 1
→
B 2
→
F 2
After measuring a station, user can switch off the instrument to save power, the
instrument will automatically continue the next station measurement after power on. If
the measurement do not finish while power off, the point needs to be remeasured
after switching on the instrument.
