Topcom Webr@cer 881 PSTN
5
Topcom Webr@cer 881 PSTN
ENGLISH
1 THE CONNECTION PANEL
•
POWER
: The power port is to connect the 9 V AC power adapter.
--> The
power LED
on the front panel will go ON when the power adapter is connected.
•
ADSL
: The ADSL port is to connect your ASDL PSTN line.
--> The
SHOWTIME LED
will go ON when the ADSL link is established.
•
Ports 1- 4 (10/100)
: This is to connect networked devices, such as PCs, ftp servers or anything else you want to
put on your network.
--> The
LAN LED’s
will indicate the connection status.
•
Reset Button:
If you would like to load default settings, press the reset button and hold it for 5 ~ 6 seconds. It will
load the factory default settings for the device. Do not press the reset button unless you want to clear the current
data.
2 CONFIGURING THE PC TO CONNECT TO THE DSL ROUTE
If you
do not
wish to set a static IP address on your PC, you will need to configure your PC to accept the IP address
that the router will provide.
1.
Click
Start
button, select
Settings
, then
Control Panel
2.
Double-click the
Network
Icon
3.
In the
configuration
windows, select the
TCP/IP protocol line
that has been associated with your network card/
adapter.
Remark
- The routers default IP address is:
192.168.1.1
- DHCP server is ON
