Topcom SOLOGIC B935, Руководство пользователя

Страница: 16 / 58

14 Sologic B935
Sologic B935
When you dial or redial this number, the pause (3 seconds) is automatically included.
7.12 Locating a misplaced handset (paging)
If you cannot find the handset, briefly press the paging key on the base unit.
All handsets subscribed on the base unit will ring so you can locate the misplaced handset.
To stop the signal, briefly press any key
on any handset.
7.13 Using the alphanumeric handset keypad
Use the alphanumeric keypad to type text. To select a letter, press the corresponding
alphanumeric key
. E.g. if you press the alphanumeric key ‘5’, the first character ‘j’
appears on the display. Press it repeatedly to select other characters from this key.
Press the ‘2’ key once to select the letter ‘a’. If you would like to select both ‘a’ and ‘b’ after
each other, first press the ‘2’ key once to select ‘a’, wait 2 seconds until the cursor moves to
the next position and then press the ‘2’ key twice to select ‘b’. You can delete characters
mistakenly typed by using the ‘
Erase ’ key. The character in front of the cursor will be deleted.
You can move the cursor by pressing the up and down keys
/
.
7.14 Setting the ring volume level on the handset
You can change the ring volume of an incoming call (internal and external) between 6 levels
(levels ‘1’ to ‘5’ and ‘
Off ’).
If you select level ‘ Off ’ the handset will not ring when a call is received.
Level ‘5’ is the highest level.
7.14.1 Setting the ring volume and Melody for Internal and external calls
• Press the ‘ Menu ’ key.
• Press the up or down key
/
repeatedly until ‘ HS Settings ’ is selected.
• Press ‘ Select ’ to confirm.
• Press the up or down key
/
repeatedly until ‘ Ring Setup ’ is selected.
• Press ‘ Select ’ to confirm.
• Select ‘ INT Ring ’ or ‘ EXT Ring ’ and press ‘ Select ’.
• Select ‘ Melody ’ or ‘ Volume ’ and press ‘ Select ’.
• The current volume and melody is shown and hearable.
• Press the up or down key
/
repeatedly to select the desired volume/melody.
• Press ‘ Save ’ to confirm your selection or press ‘ Back ’ to leave the menu without
saving.
7.15 Setting the earpiece/handsfree volume
You can also use the menu to adjust the audio volume of the handsfree speaker and
earpiece:
•
Press the ‘ Menu ’ key.
• Press the up or down key
/
repeatedly until ‘ HS Settings ’ is selected.
• Press ‘ Select ’ to confirm.
• Press the up or down key
/
repeatedly until ‘ Audio Setup ’ is selected.
• Press ‘ Select ’ to confirm.
You can also change the ring volume during incoming call,
see “7.4 Receiving a Call”.
19
8
15 7
15 7
15 7
15 7
13
5
15 7
15 7