10
TOPCOM Outdoor Sportswatch 2000
10
PACER MODE
The pacer will generate beeps at a pre-defined beeping
rate.The beeping rate can be set from 30 to 180 beats per
minute (BPM) in step of 5.
10.1 USING THE PACER
•
In current time mode, press
[M]
until
PACER
is
displayed.
•
Press the
[S/S]
button to start the pacer.
•
The step counter
“St”
will run in the middle of the
display (max 99999 steps)
•
Press the
[S/S]
button to stop the pacer.
•
To reset the step counter, press and hold the
[L/R]
button when the pacer was stopped.
10.2 HOW TO SET THE BEEPING RATE
•
Press and hold the
[M]
button for 2 seconds in Pacer Mode.
•
When the beeping rate digits start to flash, press the
[S/S]
or
[L/R]
button to increase / decrease the number. (Hold down the button to
change the number at a higher speed).
•
When the setting is completed, press and hold the
[M]
button to exit
the setting display.
11
DUAL TIME MODE
The Watch includes a function to show the time for a second time zone.
The second digit of the dual time synchronizes with the Current Time.
•
In current time mode, press
[M]
until
T2
is displayed.
•
Hold the
[M]
button for 2 seconds. The flashing "
SET
"
icon will be displayed.
•
Press the
[M]
button to switch between hour and
minutes.
•
When the digits are flashing (selected), press the
[S/S]
or
[L/R]
button to increase / decrease the
number (Hold down the button change the number at a higher speed).
•
When the setting is completed, hold the
[M]
button to exit the setting
display.
[
S
/
S
]
beep-beep
