Topcom Multitalker 1000, Руководство пользователя

Страница: 10 / 144

10 TOPCOM MULTITALKER 1000
TOPCOM MULTITALKER 1000
14.9 CHANNEL SCAN
CHANNEL SCAN performs searches for active signals in an endless loop from channel 1 to 8.
• Press and hold and briefly to start scanning.
• Release the buttons.
• When an active signal (one of 8 channels) is detected, CHANNEL SCAN pauses and you will hear
the active signal.
• Press
to communicate through the active signal channel. Press to deactivate channel
scan.
When an active signal (one of 8 channels) is detected, press or to bypass the current channel and continue to
search for another active channel
14.10 CALL TONES
A call tone alerts others that you want to talk.
a. Setting the Call Tone
5 different Call Tones can be selected.
• Press
4 times. CA will be displayed.
• Press or to select another call tone or select OF to enable call tones.
• Press to confirm your selection and return to the stand-by mode.
b. Sending a call Tone
Press briefly. The call tone will be transmitted for 3 seconds on the set channel.
14.11 ROGER BEEP ON/OFF
After the - button is released, the unit will send out a roger beep to confirm that you have stopped talking.
To set the Roger Beep.
• Press
5 times. ‘ro’ will be displayed.
• Press to enable (ON) or disable the Roger-Beep (OF).
• Press to confirm your selection and return to the stand-by mode.
14.12 KEY-TONE ON/OFF
When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
6 times. ‘to’ will be displayed.
• Press to enable (ON) or disable the Roger-beep (OF).
• Press to confirm your selection and return to the stand-by mode.
MENU
MENU
MENU
CALL
MENU
MENU