ENGLISH
57
Butler 5020
- Press
OK
to confirm.
- Select
CHANGE PIN
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- Enter the old Pin code:
OLD PIN:
- Press
OK
to confirm.
- Enter the new Pin code:
NEW PIN:
- Press
OK
to confirm.
- Re-enter the new Pin code:
NEW PIN:
- Press
OK
to confirm.
- Press
ESC
to leave the menu.
5.9.
Handset Reset
The standard settings are:
Display language:
English
Handset Pin:
0000
Redial List:
Empty
Call List:
Empty
Baby Call:
Off
Battery low alert:
On
Key Click:
On
Out Of Range signal:
On
Direct memories:
Empty
Knocking Tone :
On
To reset the handset to its standard settings:
- Press
MENU
when the unit is in standby mode..
- Select
SECURITY HS
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- Select
RESET
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- The display shows
SURE?
- Press
OK
to confirm or
ESC
to leave the setting.
5.10. Subscribing a handset to a base station
Every new handset must be subscribed onto the base station before you can make a phone call.The
included handset is already subscribed.
If you want to subscribe a new handset on the bases station or when you have unregistered the
handset, the base set must be set in subscription mode.
You will need the
PARK CODE
. This is the 15 digit code, which you can find at the bottom of the base
station.
- Disconnect the power adapter for a few seconds.
- Press the
PAGING
button on the base station and re-connect the power adapter.
- Keep the
PAGING
button pressed for more than 15 seconds. The base station will be in subscription
mode for 5 minutes.
- Press
MENU
when the unit is in standby mode..
- Select
SYSTEM
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
- Select
SUBSCRIPTION
by using the
UP
and
DOWN
keys
.
- Press
OK
to confirm.
Handl. B5020 euro 18/3/02 12:11 pm Page 57
