版本：
V00 Page 6 of 6
5.
BMS Management system
Over current protection:
Status indicator light is red when charging current is greater
than 10A.
Low-voltage protection:
When the battery voltage is lower than 9.2V, BMS
automatically close all output function, status indicator light turns red. You need to turn off
the switch, and then turn on the switch to make the product recover to normal.
Over-voltage protection:
When the battery voltage exceeds 12.5V, BMS automatically
close all input.
Overload protection:
When output power or start power of device is too large, BMS
automatically turn off the device, status indicator light turns red. You need to turn off the
switch, and then turn on the switch to make the product recover to normal.
Short circuit protection:
When AC output protection, BMS automatically turn off the
device, until the next boot after 5 seconds delay, the AC output start up automatically; When
DC output protection, BMS automatically turn off the device, green light turns red, until the
next boot after 15 seconds delay, the DC output start up manually (Note: make sure the load
is without short circuit, and then turn on the product).
Overheating protection:
When internal temperature is over 149
℉
or 65
℃
, BMS
automatically turn off the device, status indicator light turns red. You need to turn off the
switch, and then turn on the switch to make the product recover to normal.
6.
Warning
Please read the following content carefully before using this product, because it will damage
this product and the related electrical equipment if operated improperly or used this product
with unmatched electricity equipment. Please check whether the power and voltage of
electric equipment is suitable for this product before using.
* Please use required voltage or the built-in adaptor of this product to charge when you
adopt AC charge. It is forbidden to charge by unmatched voltage or make a short circuit
when charging;
* It is forbidden to touch the internal metal of OUTPUT or make the short
–
circuit of output
artificially;
* It is forbidden to connect the AC output of this product with grid;
* Do not shower or immerse the product into water; It should be placed in a cool and dry
environment when not in use;
* It is forbidden to put this product into fire, heater or hot heat source;
* It is prohibited to knock or throw the product;
* It is prohibited to use the product in places of strong static electricity and strong magnetic.
Otherwise, it will damage the safety protection device of the product;
* This product has perfect protection function, but please be careful when used and try to
avoid wrong connections and short circuit operation to prevent accidental damage;
