11
www.topazsystems.com
Back to Top
GemView 7 Tablet Display User Manual
Install GemView Tablet Display Driver
Note: If you are using your computer in a Citrix environment, please refer to the
document
GemView Tablet Displays in Citrix XenDesktop Environments
. If you are
using your computer in VMWare Horizon environment, please refer to the document
GemView Tablet Displays in VMWare Horizon Environments
. These guides will provide
setup and configuration instructions.
Download and run the GemView installer from the Topaz website:
www.topazsystems.com/software/download/gemview.exe
.
Note:
You must reboot your PC
after the installation completes. This software provides pen input functionality for the tablet
display.
Configure Tablet Display for Pen Input
Follow the instructions below to configure your GemView Tablet Display for pen input:
1. In All Apps or All Programs, under GemView Tablet Display Manager, click on Tablet
Display Manager.
2.
In the Tablet Display Properties window that opens, notice that the Pen tab is selected.
Write on the GemView Tablet Display with the pen and the current pressure will show as
a green bar. Adjust the tip feel slider between soft and firm to select the pressure desired.
The default setting is recommended for standard use.
