6
WORKLIGHT LED COB 35W /
3000 LUMENS ON TRIPOD
EN
Translation of the original instructions
OPERATION
How to use Worklight Tripod
1. Remove Work light and tripod from packaging, remove plastic
bag covering the assembly. Remove wire cord strap and unfold
supply cord.
2. Unloosen the tripod leg collar knob and push collar down to
spread the legs and then tighten to secure in position, now place
tripod on a stable flat surface.
3. Tripod leg spread
To increase the stability of the tripod, the legs can be spread out to increase footprint. Simply loosen the locking knob
(DD) and push collar(EE) down as far as you want to achieve the desired leg spread , then tighten lock Knob to secure
position.
EE
DD
To return the legs to the folded position for storage, pivot the tripod leg lock release button (DD) and pull the collar
assembly (EE) back up to top.
Tripod Height Adjustable
The height of the tripod can be extended or lowered by adjusting the light mount pole.
Hold the pole with one hand, loosen locking knob (H), adjust pole to the desired height and tighten locking knob to
secure in position.
H
Switching the worklight on and off
Never use a damaged product.
Plug supply cord into mains power outlet or power board and switch ON at the wall or power board (if it is individually
switched power board). To switch on or off simply press the on/off switch.
