4
KIT NUM TIG-1
EN
WARNINGS - SAFETY RULES
GENERAL INSTRUCTION
These instructions must be read and understood before any operation.
Any modification or maintenance not indicated in the manual must not be undertaken.
The manufacturer shall not be held liable for any personal injury or material damage caused by use not in accordance with the instructions in this
manual. In the event of a problem or uncertainty, consult a qualified person to handle the installation correctly.
This manual describes the wiring of this product. Any user who does not strictly comply with the safety instructions described in this manual may
be exposed to electrical risks and/or a serious or even fatal accident.
ELECTRIC SAFETY
During any intervention on the product, make sure to secure the area by keeping at a distance any person who has not read the instructions of safety
described in this manual. This product should preferably be installed by a professional in accordance with the installation rules in force in the country.
If not, it is recommended that you read these rules before working on it.
PRECAUTIONS AGAINST ELECTROSTATIC DAMAGE
Static electricity can damage electronic equipment. Use a grounded anti-static wrist strap, an ankle strap, or equivalent safety device
to prevent electrostatic damage (ESD) when installing this product.
Electrostatic damage can irreparably damage the generator and/or the product. To protect electronic components from electrostatic damage, place
this product on an antistatic surface, such as an antistatic discharge mat, antistatic bag, or disposable antistatic mat.
KIT CONTENTS
Electronic card
97743
Wire harness
RJ45 Cable
Cable DB9
500 mm
Adapter
Sub-D9
Support plate
Support card
300 mm
500 mm
PRESENTATION
The NUM TIG-1 digital kit (ref. 037960) allows the addition of an automation module (SAM) to compatible TIG machines.
Compatibility
ref.
SAM
(064935)
TITANIUM 400 AC/DC HF
013568
IMS TITANIUM 400 AC/DC HF
037830
TITAN 400 DC HF
013520
IMS TITAN 400 DC HF
013810
