3
Adjustment steps
1. Turn on the transmitter and please make sure that there is enough power for the transmitter. Push the joystick
of the throttle and throttle trim switch to the lowest position, and keep other trim switch be in the neutral position.
2. Please connect the battery to the ESC plug, and put the battery into the battery case well,
than close the battery cover.
3. Hold the rear part of the fuselage and slowly push the throttle joystick to ensure that
the motor is running normally and the battery is fully charged.
4. Check if the chuck of each rudder surface is loose or not, and ensure that the running
direction of each rudder surface is consistent with the joystick.
