11
After finishing the edit, please press “ Enter “ key for saving information.
To use “ Tab “ key to select items like Bank, OSD, SCAN, CHANGE PASSWORD, CONSOLE ON/OFF,
etc…
a. The “ OSD: 10 SEC” means that
the OSD windows display or PC
system name exists 10 sec. on
your monitor. You can modify it
from 05 sec to 99 sec. The
factory default value is 10 sec..
15
☼
SYSTEM 15
16
SYSTEM 16
OSD :
1 0
SEC.
(
CHANGE PASSWORD
TAB : NEXT
INSERT :EDIT
ESC : QUIT
ENTER :COMPLETE
SCAN:
1 0
SEC. CONSOLE
ON
/OFF
b. The “ SCAN TIME” means that scan interval from one PC port to next PC port. The default SCAN time
is 10 sec and the maximum scan time is 99 sec.
c. The “ CHANGE PASSWORD” is for user to avoid all PC systems to be intruded by the other person.
The default password is 8 digits “ 00000000 “.
ESC : QUIT
ENTER : COMPLETE
ENTER PASSWORD :
█
There is an enter password window showed out when you select this item and then press the Enter.
The maximum password is eight digits. After you key in the password already and press the Enter key,
there is another window for confirming your typed password.
ESC : QUIT
ENTER : COMPLETE
ENTER NEW PASSWORD :
█
ESC : QUIT
ENTER : COMPLETE
RETYPE NEW PASSWORD :
█
You need to retype the password again for rechecking your previous key-in password is matched or not.
ESC : QUIT
ENTER : COMPLETE
NEW PASSWORD COMPLETE
d. The “ CONSOLE ON/OFF “ means to manage the console of KVM switch. If you select “ CONSOLE ON
“, it means that any user can use the console. If you select “ CONSOLE OFF “(factory default OFF
state), it means that any user will not be allowed to use the console unless you enter the password.
When you enter the password already and pass the KVM switch authentication, the CONSOLE will be
set to ON. After you finish using KVM switch, please don’t forget to set up CONSOLE ON state to OFF
Содержание KS-104OSD
Страница 1: ...KS 104OSD KS 108 KS 116 USER S MANUAL ...
