TOP VEHICLE TECH GRKBM02, Руководство по установке, Страница: 4 / 8

4
www.topvehicletech.com
1. Take the steering wheel control interface and attach the 14-way steering wheel harness connector to
the relevant side.
6. Connect the antenna adapter to both the pre-existing vehicle connection and to the back of the new
stereo.
FITTING GUIDE
STEREO INSTALLATION
7. Attach the additional wiring on the harness to the back of the stereo:
Pink
- Speed Pulse
Pink/Black
- Mute
Purple
- Reverse Gear
Green
- Park Brake
8. When all the above wires (and any additional accessories) have been connected, finally make the
connections between the stereo and the vehicles pre-existing power/stalk connectors.
3. Attach the 12-pin connector from steering wheel harness to the speaker interface box.
4. On the opposite side of the speaker interface box will be two 2-pin ports. Connect the 2-pin connector
from the speaker box into the right port (when face up).
5. Connect the yellow 12V permanent wire to a source of 12 volt i.e. the fuse board or direct to battery.
2. Make a cut within the orange and purple loops on the back of the patch lead connector. Then proceed
to attach ‘ Key 1 ’ to the light blue ‘SWC Remote’ wire on the stereo. When done, connect the 12-way
connector to the steering wheel control interface.