Top pro music gear D32USB, Руководство пользователя

Страница: 5 / 16

1.Disassemble the 2 screws by the screw driver following
the below picture.
AES/EBU
2. Disassemble the AES board from MIXER.
3.Insert the Module on the slots following the below picture
and the Module must be on the middle of the slot.
4.Push the module and make it matched with the whole
panel .
AES/EBU
USB AUDIO
(MAIN / SUB1-4) (AUX1-8)
D32USB MODULE
5.Assemble the 2 screws following the below picture.
AES/EBU
AES/EBU
USB AUDIO
(MAIN / SUB1-4) (AUX1-8)
D32USB MODULE
AES/EBU
USB AUDIO
(MAIN / SUB1-4) (AUX1-8)
D32USB MODULE
D32USB
9.Click "finish" on next interface to finish the installation.
10.Click the icon on the right corner after step9.
11.After the above operation, you will see below interface,
which means the installation is finished and you can use it.
V
n
c
P.M. 07:40 P.M. 07:40
Apply
DU3232
Archwave USB Driver Control Panel X
Device name
0x7f5005000000
Serial number
Up
Down
Edit Device Name
1 Device(S) connected.
Ready
Devices
Input Channels
Output Channels
Synchronisation
Settings
Streams
File Info
Finish Cancel
Completing the Seikaku DU3232
USB2.0 Driver v6.15.0.0 Setup
Wizard
Seikaku DU3232 USB2.0 Driver V6.15.0.0 has been installed
on your computer.
Click Finish to close this wizard.
Setup
X
< Back
6
3
D32USB
DRIVER INSTALL
3
INSTALLATION