Top Gun TIG 320 AC/DC, Руководство оператора

Страница: 16 / 35

INSTALLATION AND ADJUSTMENT
14
§4 Operation
§4.1 Layout for the panel
1 Positive output: The welder’s positive polarity output.
2 Negative output: The welder’s negative polarity output.
3 Aero socket: Is connected to torch switch control wire.
（
It has 14 leads and lead 8 - lead 9 are
connected to torch switch control wire
）
.
4 Shield gas connector: Is connected to the gas input pipe of torch.
5 Power source switch: Switch to “ON”, the welder is turned on, while switch to “OFF”, the welder
is turned off.
6 Power source input: To connect power source.
7 water box connector: To connect water box.
8 Shield gas input joint: To connect one head of the gas hose while the other head of which is
connected to argon gas cylinder.