Top Gun Park Flite F-4E Phantom, Инструкция по эксплуатации

Страница: 8 / 15

8
8 off AA size dry cells or high capacity Nimh
batteries (not included) must be inserted before
operation.
Remove the rear cover and install batteries into the
battery tray as directed by the moulded in polarity
(+ & -) markings.
A small panel of four small slide switches is set on
the front panel of the transmitter.
These are electronic servo reversing switches and
should be adjusted to give the correct control
surface deflections relative to stick movements.
SECTION 4: ASSEMBLY
Locate the main fuselage assembly and nose cone
and dry fit together ensuring that the parts locate
together.
Apply adhesive to the contact faces and press firmly
together
Wipe off any excess adhesive and allow to dry.
Locate the main undercarriage assemblies, clamp
plates and fixing screws.
Insert undercarriage into mounting plate located in
the wing panels and fix in place with saddles and
four self tapping screws.
Note wheel is located outwards towards rear of the
wing.
Position the nose wheel assembly over the collet in
the forward fuselage.
The flat machined in the wire should align with the
grub screw with the coil facing forward.
Insert wire in collet and tighten grub screw with
Allen key.