Top Global MobileBridge MB8000, Руководство пользователя

Страница: 48 / 52

Top Global Technology Ltd. ----MB-8000 User Guide
- 47 -
5. Troubleshooting
5.1 Overview
„ Introduction
„ Reset to Factory Default procedure
„ Force Reload Procedure
5.2 Introduction
This section helps you locate problems related to MB-8000 setup. The most common
installation problems relate to IP Addressing. For example, without the TFTP server IP
Address, you will not be able to download the MB Image to the MB-8000.
IP Address management is fundamental. We suggest you create a chart to document and
validate the IP addresses for your system.
If the password is lost or forgotten, you will need to reset the MB-8000 to default values.
The
Reset to Factory Default
procedure resets configuration settings, but does not
change the current MB Image. The
Forced Reload
procedure erases the current MB
Image if you need to download a new image.
It is useful to set up the serial port and use your terminal emulator to monitor MB-8000
activity. Serial port setup is described in “Troubleshooting”.
5.3 Reset to Factory Default Procedure
Use this procedure to reset the network configuration values, including the MB-8000 IP
Address, Subnet Mask, and so on. The current MB Image is not deleted. This procedure
may be required if the MB-8000 password is forgotten.
Press and hold the
RELOAD
button for about 30 seconds. Result: The MB-8000 reboots,
and the factory default network values are restored.
5.4 Forced Reload Procedure
Use this procedure to force the MB8000 back to default network configuration values and