Top Global MB6800 Скачать руководство пользователя страница 75

Страница: 75 / 80

Top Global USA. ----MB6800 User Guide

• Check if other PCs work. If they do, ensure that your workstation’s IP settings are correct

(IP Address, Subnet Mask, Default Gateway, and DNS). Restart the computer that is

having a problem.

• If the PCs are configured correctly, but still not working, check MB6800. Ensure that it is

connected and powered on. Connect to it and check its settings. (If you cannot connect to

it, check the LAN and power connections.)

• If MB6800 is configured correctly, check your Internet connection (WWAN card) to see if

it is working correctly.

• Manually configure the TCP/IP settings with a DNS address provided by your ISP.

• Make sure that your browser is set to connect directly and that any dial-up is disabled.

For Internet Explorer, click Tools, Internet Options, and then the Connection tab. Make

sure that Internet Explorer is set to Never dial a connection. For Netscape Navigator, click

Edit, Preferences, Advanced, and Proxy. Make sure that Netscape Navigator is set to

Direct connection to the Internet.

Frequently Asked Questions

What is the maximum number of IP addresses that MB6800 will support?

MB6800 will support up to 253 IP addresses.

Is IPSec Pass-Through supported by MB6800?

Yes, it is a built-in feature that MB6800 automatically enables.

Does MB6800 support IPX or AppleTalk?

No. TCP/IP is the only protocol supported.

What is Network Address Translation and what is it used for?

Network Address Translation (NAT) translates multiple IP addresses on the private LAN

to one public address that is sent out to the Internet. This adds a level of security since the

address of a PC connected to the private LAN is never transmitted on the Internet.

- 75 -

Содержание MB6800

















































































Результаты поиска

Содержание MB6800

Отзывы:

Похожие инструкции для MB6800

Бренды по названию

Популярные бренды

Top Global MB6800, Руководство пользователя

Результаты поиска

Содержание MB6800

Отзывы:

Похожие инструкции для MB6800

Бренды по названию

Популярные бренды