Charging:
Full Half Low Empty
This device can be charged using the provided DC car charging cable or the provided USB/data cable connected to a USB
terminal on a PC or laptop computer. When being used as a driving recorder, it is recommended to turn on the “Record
Overwrite” (2 minutes is recommended). Connect the DC car charger to the Dash Camera. When the vehicle is turned on, the
Dash Camera will automatically start video recording. When the vehicle engine is turned off, the data will be saved, and the
device will shut down automatically.
Caution:
Only the provided DC car charger, with the output of 5V, can be used for this GPS DASH CAMERA. Using any other charger, aside
from the one provided, may damage the camera.
Operation Instructions
Turn on / off and auto off of video recorder
•
Press the “Power” button momentarily to turn on. Press the “Power” button for 2 seconds to turn the
camera off.
•
To save battery, set the “AUTO POWER OFF” to 1, 2, 3, 5, OFF. The camera will automatically turn off
after 1, 2, 3, 5 minutes, if the camera is not in use.
Video Recording Mode:
•
Press “REC/OK” button to start video recording. Press “REC/OK” button to stop video recording. During
recording, a red icon will appear on the screen.
Menu:
•
Resolution
: Options of 1920x1080P30
，
1440x1080P30
，
1280x720P30
，
848x480P60
，
848x480P30
•
Quality:
L(Low), M(Medium), H(High)
•
Photo Size:
3M, 5M, 8M, 12 Mega pixels
•
Record Overwrite
: to set or shut the circulating video recording, in the status of circulating video
recording, when the capacity of TF card is full, the previous content shall be covered automatically
•
Motion Detection:
ON/OFF
•
White Balance:
Auto, D4000, D5000, Fluorescent, Cloudy, Sunny
•
Automatic Video Recording:
When camera is connected to the provided car charger, the device will start
recording automatically after 3 seconds after vehicle is started. When the vehicle is turned off, the
camera will stop recording and save the footage
•
Power On Delay:
When connected to the car charger, select “Power On Delay”, the delay start time can
be set to 10, 20, 30 seconds, and OFF
•
Power Off Delay:
When connected to the car charger, select “Power Off Delay”, Tthe delay stop time can
be set to 10, 20, 30 seconds, and OFF
•
Language
: Select desired
•
Auto off
: 1, 2, 3, 5 minutes, and OFF
•
Format:
Format the TF card
•
Time Stamp:
Automatically stamps videos with date and time
•
Date
: Use “Up/Down” buttons to change the digits and press “OK” to move to next field
•
Auto LCD off Time
: Set the time to turn off the LCD screen automatically; 30 sec, 1, 5 minutes, and “NO”.
Press any key to wake up the LCD screen
•
Default Setting:
Sets the system default values
•
Flicker
: Choose the frequency of electricity. In the event of selecting the wrong frequency, horizontal
lines or interference may show on the image
•
Version
: Check the cameras software version
