Operation Instructions
Switching modes
1) Press the “POWER” button momentarily to turn the device “On”.
2) When unit is powered “On” the device defaults into the video setting. This is indicated by observing a “Purple Video
Camera” in the upper left hand corner of the display screen. Press the “OK” button to begin recording.
3) Press “OK” button again to pause the recording and the unit will save files automatically.
4) Press “MODE” to cycle through the other “Modes” (Camera, Audio Recording, Playback / View / Listen).
5) Press and hold “POWER” button 3 second to shut down the device.
Menu Setting
System Settings
To set up the system settings of for Video, Photo, and Playback modes, use the following System Setting Instructions:
Video Setting
1) Movie Size (Video Format) : [FHD] 1920x1080, [HD] 1280x720, [D1] 848x480, [640] 640x480
2) Date stamp: OFF, D&T (Date & Time)
3) Motion detection: OFF / ON.
If selected “
ON
”, the device will start recording automatically when movement is
detected. During recording, the device will save video in 2 minute intervals automatically. If after two minutes no motion
is detected, the unit will enter standby mode but will start to record again if movement is detected
.
4) Loop Recording: OFF / ON.
5) Loop Time: 2min, 5min, 10min. With “Loop Recording” turned “ON”, the device will save video files in 2/5/10 minute
intervals automatically. When the SD card is full, the device will begin to record over previously recorded segments,
beginning with the first recorded segment recorded. The time it takes for the camera to Loop Around is associated with
the “Video Format” you choose. Higher the quality (FHD), the faster the Loop Around.
6) Continue: Off, 10min, 20min -‐ delay the power off for 10 minutes, 20 minutes.
7) Video Sound: On / Off
After selection, click “OK” button to confirm, setting is now complete. Then click “MENU” to exit.
Photo Setting
Power on; Press “MODE” button to enter photos mode. Choose “MENU” to enter the menu setting mode. Then press “MODE”
to select:
1) Resolution : [5M] 2592x1944 [3M] 2048x1536 [2M] 1600x1200 [1M] 1280x1024
2) Quality: Super Fine / Fine / Normal
3) Exposure: Exposure luminance adjustment
4) Driver Mode: Off, Self-‐timer 2S, Self-‐timer 10S, Burst.
5) Date stamp: Off, Date&Time
After selection, click “OK” to confirm, setting completed. Then click “MENU” to exit
.
