Make a Call
Step-‐1
Use the mobile phone’s keypad to dial the phone number.
Step-‐2
Press mobile phone’s “Send” or “OK” key. The mobile phone initiates the call and will transfer the call from the mobile
phone to the headset. Normally, if there is no disturbance between headset and mobile, the voice quality will be
better.
Voice dialing (dialing a number by saying a name)
It is possible to make a call directly from the headset using voice recognition. To use this voice dialing function, your mobile
phone must provide this option and corresponding voice samples must have been recorded.
Step-‐1
Enable voice recognition function of your mobile and set the mobile to hands free state.
Step-‐2
Double press the multifunction button of the headset, you will hear a beep prompt.
Step-‐3
Say the name of the person you wish to call loudly.
Answer a Call
Step-‐1
If there is an incoming call while you are listening to the streaming music, you will hear beep prompt from headset.
Step-‐2
Just press multifunction key one time.
End a Call
Use either of the following methods to end a call.
Method-‐1
Press multifunction key one time to end a call from the headset.
Method-‐2
End a call from the mobile phone’s keypad.
If you are listening to music when there is incoming call or you are making a call, the headset will switch the connection from the
music player (A2DP) to the mobile phone (HSP or HFP); the streaming music will be paused temporarily. After you end the call,
the music will resume playing and stream to the headset again.
Note
：
When you press multifunction key to answer or end a call, please just press one time. Do not press and hold.
Refuse a Call
When there is incoming call, press and hold multifunction button for about 2 second until you hear prompt from the headset.
Release the button and the call is refused.
Redial the last dialed number
Press and hold multifunction key for 2 second to redial the last dialed number.
Adjust volume
In call mode or music mode, press volume +/-‐ key to adjust volume. One short press will adjust one level. When the volume
reaches max or min, when you press, the headset will prompt “du-‐du”.
Play/Pause music
In idle state, press multifunction button one time to play or pause music.
Previous/Next song
When playing music, you can press “forward” button to play previous song and “backward” button to play next song.
Switch the call between mobile and headset
In call state, press and hold multi function button for 2 second until there is prompt from headset. The call will be switched from
headset to mobile or vice versa.
Trouble shooting:
If disconnection occurs, please check the following factors:
1) Ensure that the headset has enough power, is turned on and has been successfully paired to the mobile.
