Top Craft LMM6001, Руководство пользователя

Страница: 10 / 25

10 Topcraft
• Worn or damaged parts should be replaced for reasons of safety
3. ASSEMBLY
Assembly of the lawnmower
See Fig. 1
Adjusting the cutting height
Press the lever to the desired position in order to lower or raise the cutting height.
Warning! Only when the motor is switched off and the cutter blade is stationary!
Cable-holder
Fig. 2
Insert the extension cable's socket in the machine's switch/plug connection, and secure
with the cable-holder. The loop in the cable must be long enough to allow the cable to
slide in the cable-holder from one side to the other.
4. OPERATION
On/off switch
Fig. 3
Warning! Do not start the machine in very long grass.
Press safety button on the switch/plug connection, and then squeeze lever against the
machine's handle. Hold the lever against the handle and release the safety button. To stop
the machine, release the lever. The lever will automatically return to the neutral position.
Mowing tips
• Make sure that the area you plan to mow is free of stones, rubbish, cables, and other
objects.
• Make sure than all fastenings (screws, nuts, etc.) are tight.
• Regularly check the grass box for wear.
• Select the cutting height according to the condition of your lawn and the height of the grass.
• For best results, mow tall grass in layers. The recommended height of the grass cut
each time is a maximum of 4 centimetres.
• Mowing the grass when it is dry will achieve the best result.
• Make sure that the cutting blades can turn at full speed; the machine may not be
overloaded.
• To protect the power cord, make sure that it is lying on the ground behind you as you
mow (Fig. 6).
• Start mowing slowly by slowly pushing the machine forwards. If the cutting blades
slow down or the motor stops then you have selected the incorrect cutting height, or
GB