ToooAir TA-680, Руководство пользователя, Страница: 8 / 15

4
Text Message
The radio can receive text messages. On
receiving of a text message an icon (Envelope)
will display in the top blue status line of the
LCD.
1. Press ‘MENU” key
2. Short press
⮟
five times, for
“Dispatcher MSG” press ‘MENU’ key
to select
3. Short press
⮝
or
⮟
, to choose
desired text message press ‘MENU’
key to select/read message
4. Press the ‘BACK’ key to return to
message list or press ‘EXIT’ key to
return to home screen
5. Unread messages are identified by a
closed envelope icon next to the
message
Messages are limited to 20 characters. The
radio will store the last 5 messages
Duplex Mode - CB
The radio can be placed into duplex mode on
channels 1 to 8 and 41 to 48
While on channels 1 to 8 or 41 to 48
Press and hold the # key on the keypad for 4
seconds until you will see a
“ D ” appear on the
blue status bar. This notes the current channel
is in duplex mode and will transmit/receive 30
channels higher.
To stop duplex mode, select desired channel,
press and hold the # key on the keypad for 4
seconds until you will see the
“ D ” disappear on
the blue status bar. This notes the current
channel is not in duplex mode and will
transmit/receive on the current channel. The
display will show the receive frequency.
Roger Beep function
This function can be set in “Analog Setting”
menu
On: A beep tone is emitted when the PTT is
pressed or released indicating start or end of
transmission
Off: No beep tone is emitted during PTT
operation
Squelch
The radio audio can open at varying levels of
received signal strength.
1. Press ‘MENU’ key
2. Short press
⮟
four times, for
“Analog Setting” press ‘MENU’ key
to select
3. Short press
⮝
seven times, for “SQL”
press ‘MENU’ key to select
4. Short press
⮝
or
⮟
, to select
desired level, press ‘MENU’ key to
save selection
5. Press ‘BACK’ key twice to return to
home screen or press ‘EXIT’ key
BCLO
Busy Channel Lock Out is used to stop the use
of the PTT if the radio is receiving a UHF
transmission.
1. Press ‘MENU’ key
2. Short press
⮟
four times, for
“Analog setting” , press ‘MENU’ key
to select
3. Short press
⮟
six times, for “BCLO”,
press ‘MENU’ key to select
4. Short press
⮝
or
⮟
, to choose
desired selection, press ‘MENU’ key
to save selection
5. Press ‘BACK’ key twice to return to
home screen or press ‘EXIT’ key
Analog Settings