Toomey Earthmovers 4500B, Руководство пользователя

Страница: 43 / 80

4500B USER HANDBOOK
Page 37
6 Maintenance Requirements
6.1 Summary
The ALG graders have been designed predominantly utilising grease free SKF bearings and
bushes. This removes the requirement for regular greasing of the main pivots and cylinder
clevises. Regular greasing is required for the Axle Hubs and Swivel Hitch.
Although regular greasing is not required, regular inspections are required. These help to detect
early signs of wear or failure. Without regular cleaning and inspections, wear or minor structural
or non-structural defects could be allowed to increase or spread and could result in catastrophic
failure or injury.
6.2 Initial Maintenance Requirement
When the ALG graders are assembled, the hitch and hubs are already primed with grease
however it is the owner’s responsibility to check this prior to use.
6.2.1 Wheel Hubs
To ensure the hubs have sufficient grease to ensure long life, remove the inner grease nipple and
pump grease into the outer nipple. Continue to do so until grease comes out of the inner hole. Fit
the grease nipple back into the hub. Continue to do this for all hubs.
Figure 6.1 Wheel Bearings