2
LED SOLAR HOME NUMBER SIGN
INITIATION
This solar powered illuminated house number comes with a built-in battery
- No wiring required. The light turns on automatically at sunset and turns off
automatically at sunrise.
Easy to install - It could be mounted on the wall, mailbox, fence, etc.
INCLUDES
1 - Plaque
1 - Guide template
3 - Sets of numbers (0 - 9)
1 - Set of letters (A - Z)
2 - Screws
2 - Anchor
INSTALLATION
1. Use the guide template included to stick the set of numbers and letters provided
to the glass surface.
2. Select the light mode from the switch panel: OFF, 1-High light mode, 2-Dim light
mode, or 3-Sensor mode.
3. Choose a bright place to install the solar house number sign.
4. Drill 2 holes of 8mm diameter each into wall, leaving a horizontal distance of
120mm between them.
5. Insert the 2 anchors into the holes and fasten the screws into the wall, making
sure that the screws heads stick out about 10mm.
6. Hang-up the solar house number sign by putting the two slots in the back onto
the screws and make sure it sits steady.
12 cm
Solar Panel
Sensor
Ambient Light
Light
24 cm 7.2"
OFF
1. High light mode
2. Dim light mode
3. Sensor light mode
OFF
1
2
3
Note
While the sunlight reaches certain luminance, the lamp will not light up when people pass through the illumination range as
the product can sense it’s in the day, but it will light up automatically in the evening. The product is equipped with an internal
lithium battery, please do not replace it by yourself, and don’t put it with household garbage or in a fire to avoid explosion. Please
understand that the lighting time depends on sunshine duration and weather.
