TOOLSPACE HJK-1, Руководство пользователя

Страница: 15 / 17

12
♦ Remove the spring and washer .
♦ Slide the washer and spring onto a new engraving tip . Then
insert them and turn the engraving tip lock clockwise (in
working direction) to lock the tip in place .
♦ Ensure that the engraving tip is fi xed correctly in place.
Working procedures
You can use the appliance to create imaginative and unique engrav -
ings. For example, you can permanently mark valuable items . You
can engrave numbers and letters onto metal, glass, wood, plastic,
ceramics, stone and leather . To do this, use the supplied engraving
templates .
♦ Hold the appliance at an angle, in the same way you would
hold a pen .
♦ Your arm should be resting on the table .
♦ Move the engraving tip over the workpiece while applying
gentle pressure. To ascertain the ideal engraving speed, prac -
tice on a spare piece of material .
NOTE
► The supplied engraving tip is made of tungsten steel . It is
therefore not suitable for engraving electronic media such as
CDs, DVDs, etc. These materials and their readability could be
damaged .