12
INSTALLING IMPACT SOCKETS
WARNING:
Use only impact
sockets and accessories that are
designed for use with an impact
wrench.
Do not use chrome plated
sockets and accessories. Chrome plated
sockets and accessories are designed for
hand use only and MUST NOT be used
with an impact wrench. They may shatter
and possibly cause serious injury.
WARNING:
Always remove the plug
from the power source before changing
any sockets or accessories. You may
injure your hand if the tool is started
accidentally.
To install a socket, press the square
portion of the socket (1) onto the square
drive (2) of the impact wrench (Fig. 1).
NOTE:
Slide the socket fully onto the
square drive so the socket retainer (3) will
hold the socket firmly in place
INSTALLING THE HEX DRIVE ADAPTER
By installing the 1/2" square to 1/4" hex
adapter, the impact wrench can be used
as an impact driver for driving screws and
for use with impact nut drivers.
1. Pull outward on the large quick
connect collar (1) (Fig. 2).
2. Slide the adapter over the impact
wrench 1/2" drive (2).
3. When the adapter is fully on the 1/2"
drive, release the collar.
ASSEMBLY AND OPERATION
!
!
Fig. 1
Fig. 2
